« Eigenvalue Analysis for Control Laws | Main | Non-linear Control Simulations »

Sat, March 18, 2006 8:30 PM

Servo Specs

We use a HiTec HS-5925MG digital servo. Its specs are as follows:

Speed:0.1 sec/60 degrees at 4.8V
0.08 sec/60 degrees at 6V
Torque:102.76 oz-in at 4.8V
127.7 oz-in at 6V
Length:1.55" (39.4mm)
Width:0.78" (20mm)
Height:1.48" (37.8mm)
Weight:1.97oz (56g)

Posted by Rick on March 18, 2006 08:30 PM |

Post a comment

(If you haven't left a comment here before, you may need to be approved by the site owner before your comment will appear. Until then, it won't appear on the entry. Thanks for waiting.)


Please enter the security code you see here